County Bridge Repair
Repair of an undermined county bridge abutment: excavating around the exposed timber piles, pouring a new reinforced footing and forming cast-in-place concrete walls to protect the structure.
- Client
- County road project
- Scope
- Bridge abutment repair
- Problem
- Erosion exposed the timber piles
- Solution
- New reinforced footing & walls
- Method
- Cast-in-place formed concrete
From washed-out to built to last.
Six steps to a stronger abutment.
- 01
Assessment
Erosion had washed out the rock and soil supporting the abutment, leaving the structure exposed.
Washed-out rock under the bridge Erosion along the abutment - 02
Excavation
The area around the abutment was dug out, exposing the timber piles for the repair.
Excavating beneath the abutment Exposed timber piles - 03
Reinforced footing
Rebar was tied in place for a new footing around the base of the piles.
Rebar for the new footing Footing reinforcement along the piles - 04
Footing pour
Concrete was poured to create a solid new footing beneath the abutment.
Fresh footing concrete Footing with dowels for the new walls - 05
Forming the walls
Formwork was built on the new footing to shape the concrete walls around the abutment.
Wall forms going up Forms set along the abutment - 06
Pour & strip
The walls were poured, the forms were stripped, and the site was backfilled.
Pouring the end wall Forms in place before stripping
Let’s talk about what
you want to build.
In your 30-minute introduction, discuss your location, land, total project budget and must-haves. You do not need finished plans. A paid onsite consultation, if appropriate, is a separate next step.
